01
Bakelite — formally known as phenol-formaldehyde resin (PF) laminate — is one of the oldest and most reliable engineering plastics. These dense, hard sheets are manufactured by impregnating layers of paper or fabric with phenolic resin and pressing them under high heat and pressure. The result is a dimensionally stable material with excellent electrical insulation, mechanical strength and heat resistance.
Phenolic Laminate · Grade CE / PF-CP
Bakelite Sheet — Orange / Natural Brown
Hard, dense phenolic resin laminate sheets with a characteristic orange or reddish-brown colour. Manufactured by hot-pressing resin-impregnated paper layers into a solid, rigid board. Machinable by sawing, milling, drilling and turning.
Key properties: Excellent electrical insulation · High compressive strength · Low moisture absorption · Dimensionally stable · Heat resistant to ~120°C continuous · Self-extinguishing (UL94 V-0 available)
Key properties: Excellent electrical insulation · High compressive strength · Low moisture absorption · Dimensionally stable · Heat resistant to ~120°C continuous · Self-extinguishing (UL94 V-0 available)
Thickness: 3 – 100mm
Sheet size: 1000×2000mm
Colour: Orange / Natural Brown
Grade: CE / PF201 / PF-CP
Density: 1.35 g/cm³
Dielectric strength: ≥14 kV/mm
Typical Applications
- Electrical insulation boards and terminal blocks
- Transformer spacers and coil formers
- Switchgear and panel board components
- Jig plates and fixture bases for machine shops
- Mechanical wear pads, bushings and bearing plates
- PCB test fixtures and drilling backup boards
- Noise-dampening spacers and gaskets
02
PVC foam board — also called Celuka board, Forex, or sintra board — is a lightweight, rigid closed-cell PVC sheet with a smooth, hard surface. It combines the workability of wood with the weather resistance and chemical inertness of PVC. Available in white and a range of colours, in thicknesses from 1mm to 25mm.
Closed-cell PVC · White / Colours
PVC Foam Board (Celuka / Forex) — White
Lightweight rigid PVC sheet with a smooth, hard, paintable surface and a closed-cell foam core. Does not rot, absorb moisture or support fungal growth. Easily cut with circular saw, jigsaw, router or knife. Can be thermoformed, glued and fastened with standard wood-working tools.
Key properties: Lightweight (density 0.4–0.7 g/cm³) · Waterproof · UV-resistant (coloured grades) · Easy to cut, rout and drill · Paintable and printable · Fire-retardant grades available · No warping or delamination
Key properties: Lightweight (density 0.4–0.7 g/cm³) · Waterproof · UV-resistant (coloured grades) · Easy to cut, rout and drill · Paintable and printable · Fire-retardant grades available · No warping or delamination
Thickness: 1 – 25mm
Sheet: 1220×2440mm
Colour: White (other colours available)
Density: 0.40 – 0.70 g/cm³
Surface: Smooth both sides
Standard: ASTM D1784
Typical Applications
- Signage, displays and exhibition stands
- Interior wall cladding and ceiling panels
- Furniture backing, cabinet doors and bathroom furniture
- Retail display fixtures and point-of-sale
- Architectural models and mock-ups
- Printing substrate for digital and screen printing
- Clean room and laboratory wall panels
- Protection boards during construction
03
Pöwer Mineral Wool Insulation is a premium stone / rock wool product for thermal, acoustic and fire-resistant insulation in buildings and industrial installations. Available in rigid slabs/batts for walls, floors and roofs, and in flexible rolls with or without aluminium foil facing for pipes, ducts and curved surfaces.
Pöwer · Stone / Rock Wool · Slab / Batt
Mineral Wool Slab / Batt — Thermal & Acoustic
Rigid to semi-rigid mineral wool boards made from molten volcanic rock spun into fine fibres and bonded with a thermosetting resin binder. The characteristic golden-yellow colour indicates a standard glass-wool or mineral wool composition. Supplied in pre-cut batts for easy friction-fit installation between studs, rafters and floor joists.
Key properties: Non-combustible (Euroclass A1 / A2) · Thermal conductivity λ ≈ 0.035–0.040 W/mK · Sound absorption coefficient α ≥ 0.90 · Resistant to mould, rot and vermin · Does not settle or sag over time · Vapour permeable
Key properties: Non-combustible (Euroclass A1 / A2) · Thermal conductivity λ ≈ 0.035–0.040 W/mK · Sound absorption coefficient α ≥ 0.90 · Resistant to mould, rot and vermin · Does not settle or sag over time · Vapour permeable
Thickness: 25 – 100mm
Width: 600mm / 1200mm
Density: 30 – 100 kg/m³
Temp. range: up to 700°C
Fire rating: Non-combustible A1
Brand: Pöwer Mineral Wool
Typical Applications
- External wall cavity insulation
- Internal partition wall acoustic insulation
- Roof and ceiling thermal insulation
- Floor insulation between joists
- Industrial furnace and kiln lining
- Fire stopping and fireseal between floors
- Cold room and refrigerated warehouse panels
Pöwer · Rock Wool · Roll (Plain)
Mineral Wool Roll — Plain (No Facing)
Flexible mineral wool in roll form for insulating curved surfaces, cylindrical pipes and equipment. The plain (unfaced) roll is suitable for high-temperature applications where a facing is unnecessary or would be damaged. Easily cut with a sharp knife and wrapped around pipes or ducting.
Key properties: Flexible — conforms to curves and irregular surfaces · Non-combustible · High temperature resistance · Low thermal conductivity · Excellent sound absorption · Resistant to oil, steam and most chemicals
Key properties: Flexible — conforms to curves and irregular surfaces · Non-combustible · High temperature resistance · Low thermal conductivity · Excellent sound absorption · Resistant to oil, steam and most chemicals
Thickness: 25 – 75mm
Roll width: 600 / 1000mm
Density: 20 – 60 kg/m³
Max temp: up to 750°C
Facing: None (plain)
Typical Applications
- Pipe and duct thermal insulation
- Boiler and vessel wrap insulation
- HVAC duct lining for noise reduction
- Industrial equipment and tank insulation
- Expansion joint packing
- Ceiling and roof space insulation (roll-out)
Pöwer · Rock Wool · Roll (Foil-Faced)
Mineral Wool Roll — Aluminium Foil Faced
Flexible mineral wool roll with an aluminium foil facing bonded to one side. The foil acts as a vapour barrier and radiant heat reflector, significantly improving overall thermal performance. The metallic facing also provides a neat, professional finish and allows the roll to be secured with aluminium tape for airtight installation.
Key properties: Combined thermal + radiant insulation · Vapour barrier facing · Clean finish · Easy to cut and tape · Suitable for exposed pipe runs, HVAC and process equipment
Key properties: Combined thermal + radiant insulation · Vapour barrier facing · Clean finish · Easy to cut and tape · Suitable for exposed pipe runs, HVAC and process equipment
Thickness: 25 – 75mm
Roll width: 600 / 1000mm
Facing: Aluminium foil + kraft backing
Max temp: up to 500°C (foil side)
Vapour barrier: Yes
Typical Applications
- Chilled water and refrigerant pipe insulation
- HVAC supply and return duct wrap
- Process pipe insulation with vapour control
- Roof insulation under metal roofing sheets
- Cold storage room wall and ceiling insulation
- Industrial equipment insulation with clean finish